Skip to main content

Posts

Showing posts from 2015

ADF 12.x: Changing the List Of Values "No rows to display" text

In this post I describe how I implemented an interesting Use Case where the customer wanted to have an alternate message in the LOV when there is no data found. We all know how this can be changed in an af:table component by simply changing the emptyText property. In a List of Values, this works 'slightly' different.

Lets start with the basics

By default you will see the following List Of Values, telling you that no data was found:


However in the case of my customer, they were not happy with the text. So I had to come up with something else. That is interesting, because the ListOfValues is an ADF component in itself and the individual components inside the LOV cannot be manipulated by means of properties. I had to find a way to get access to the table component inside the List Of Values.
The way to do this has been described by Frank Nimphius, a long while ago, in his Forum Harvest posts. To be more specific, it is the harvest of November 2010, section "How-to define acces…

ADF 12c : Using Jasper Reports en JasperSoft Studio 6.1; What Libraries do you need?

Over the last couple of years, or better in the last decade I have implemented several reporting solutions with Jasper Reports in ADF. I did that in ADF 10g, ADF 11.1.1.x, ADF 11.1.2.x and ADF 12.1.x
I also used several version of Jasper Reports. There is a whole lot of documentation, blogposts and presentations available. So when today I got a request from one of my customers to make a setup for the implementation of Jasper Reports 6.1 in ADF 12.1.3 I did not expect any problems. Boy was I wrong.

Here is the Story
With all the knowledge from the past, I decided to follow the known steps.
1) Download iReport Designer,
2) Build a report in iReport
3) Create an ADF application
4) Add the necessary libraries to use the report
5) Call the report from a button via a Managed Bean

Step 1
In the past I used iReport designer to build the reports. When you go to the download site of iReport designer you now see an interesting message.


So I took this serious and decided not to use iReport Designer…

IoT Hackathon Part IV : Using Web Services to send Sensordata

In the previous 3 posts, building towards the eProseed IoT Hackathon, I described how to setup your Raspberry Pi, and how to use the GrovePi sensors. The used example is a small weather-station that read temperature and humidity and shows the readings on a display. That is all very nice, however, the data remains local on the Raspberry Pi so there is nothing that we can do with this information from an 'enterprise' perspective. In this post I will explain how easy it is to send the data to whatever 'end point' by using a REST-JSON web-service.

The Database Tables
For this use case I decided I needed 2 tables. One to hold all my available sensors (yes, I know, I have only one) and one to store the measurements per sensor.


The Webservice

In order to store the data in the database tables I need to send it from the Raspberry Pi to the database. For that I use a simple REST/JSON webservice that has a POST method. I also implemented PUT, GET and DELETE methods, because they m…

ADF 12.1.3 : Implementing Default Table Filter Values

In one of my projects I ran into a requirement where the end user needs to be presented with default values in the table filters. This sounds like it is a common requirement, which is easy to implement. However it proved to be not so common, as it is not in the documentation nor are there any Blogpost to be found that talk about this feature. In this blogpost I describe how to implement this.

The Use Case Explained
Users of the application would typically enter today's date in a table filter in order to get all data that is valid for today. They do this each and every time. In order to facilitate them I want to have the table filter pre-filled with today's date (at the moment of writing July 31st 2015).


So whenever the page is displayed, it should display 'today' in the table filter and execute the query accordingly. The problem is to get the value in the filter without the user typing it. Lets first take a look at how the ADF Search and Filters are implemented by the f…

IoT Hackathon Part III : Some enhancements to the sensor example

In my previous post I showed you how to setup a simple weather-station using Raspberry Pi, GroovyPi sensors and Python. It worked very well, but there is definitely room for improvement. In this short post I describe some of these improvements. First you will learn how to start the weather-station when you reboot the Pi. Next I will show you how to create some decent log info.

Autostart
The weather-station works like a charm, but if the Raspi is rebooted, you need to manually restart the python script. That is not the way I want this to work, I want the weather-station start on reboot. Actually this is very simple. The Raspberry Pi uses Linux as OS and thus we can use the crontab to schedule when to start tasks. With the @reboot directive, a task starts on reboot. The only thin we need to do is to add a line to the crontab that tells that we want to start our weather-station on each and every reboot. You can open te crontab for editing by issuing the following command:
$ sudo crontab -…

ODTUG KScope15: One week in a nutshell

Last week I visited ODTUG KScope15 in Hollywood Florida. In this post I will share my findings and hope that you can benefit from it.
My general impression of the conference is that it was to hot for me in Florida. At least to hot for a conference. If you can sit on the beach whole day long, it is a great place to be, but hey, I had to work.... From a content perspective, there was a whole lot of Mobile and Cloud, and just a tiny bit of ADF. We need to work on this for next year as per request of the attendees who really were asking for more ADF content.

Anyway, here is my week in a nutshell.
Saturday
Not much to do after an 18 hour trip. So when I arrived at the hotel the only thing to do was enjoy the view and get some Cuban food. What better place to do that then in Southern Florida. The food was good and I went there again during the week.


Sunday
The Sunday symposium was a very good one from an Oracle ADF Developer Perspective. The Sunday Symposium took a deep look at the impact of …

IoT Hackathon Part II : Overview of Grove Pi sensors

In September (15th and 16th) we will be organising an IoT Hackathon together with Oracle. I preparation of that I will write several post here concerning IoT. This post gives you an Overview of Grove Pi sensors and some of the fun things that you can do with it. See also this two minute tech tip that is an intro to this post.

The GrovePi+ Starterkit
Connecting sensors to the Internet of Things (IOT) is really easy! No need for soldering or breadboards: plug in your Grove sensors and start programming directly. GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi and the Internet of Things.

Here is what the kit contains:

The GrovePi+ Board12 Grove sensorsGrove cables for connecting the sensors to the GrovePi+ board.
The following sensors and lights are in the kit:
Grove – Sound SensorGrove – Temperature and HumidityGrove – Light SensorsGrove – RelayGrove – ButtonGrove – Ultrasonic RangerGrove – Rotary Angle SensorGrove – LCD RGB BacklightGrove – Red LE…

IoT Hackathon Part I : Setting up your Raspberry Pi

In September (15th and 16th) we will be organising an IoT Hackathon together with Oracle. I will write several post here concerning IoT, starting with this one where I tell you how to do the default setup of your Raspberry PI. See also this two minute tech tip that is an intro to this post.

For configuring your raspberry Pi there are several options. I prefer to use a keyboard, monitor and mouse so I can actually see what I am doing. The Pi has several USB ports and also an HDMI port.



So if you have a monitor, keyboard and a mouse available, you can plug those into your Raspberry Pi and you are all set. Connect to the power and the Pi will boot into an initial setup screen that allows you to select your preferred OS. That is of course only if you inserted an SD card in the Pi that contains the various available OS's. Select your preferred OS and click install so that the Operating System gets installed. After a short while, the installation is complete.



Once the install has finishe…

ODTUG KScope15: Sunday Symposium

Sunday symposium took of at 8:30. Unfortunately i had to skip the first two session due to some work That had to be done first. The first session I really got to attend was Brian Fry's session on Oracles Developer Cloud Service.

JDeveloper, Eclipse or Netbeans was the way you would work with Oracle Developer Cloud. Now there is a new feature (not publicly available) that is a browser based IDE. It is a full development environment. It is a very flexible, responsive and quick UI. it has an integrated out of the box GIT repository. It can be used for both JavaScript, and Java EE and java SE. Oracle uses the DevCS to build the DevCS with over 145 developers using 27 GIT repositories. So oracle now is drinking their own champagne, which sounds much better then eating their own dog food by the way.


The demo was nice and showed the power of the Javascript editor and the integrated support with GIT. also the Java editor looked very promising. We will have to sit and wait for this to be …

ODTUG Mobile Day : "Going Mobile? Where is Oracle Taking You?"

Yesterday ODTUG organised the ODTUG Mobile Day in Utrecht the Netherlands. The event was supported by two local user groups, OGh and OBUG, and sponsored by eProseed NL.
This full-day event was dedicated to Oracle's next-generation mobile development, infrastructure, and security solutions: "Going Mobile? Where is Oracle Taking You?". All of this was presented by the world’s leading ACE Directors and ACEs,
Lonneke Dikmans – Oracle ACE DirectorDimitri Gielis – Oracle ACE DirectorRoel Hartman – Oracle ACE DirectorMark Rittman – Oracle ACE DirectorMia Urman – Oracle ACE DirectorLuc Bors – Oracle ACEand several Oracle speakers. Session abstract are published at the ODTUG website.
These top experts in the field showed how to implement the latest mobile advancements from the newest technologies, such as Oracle Mobile Cloud infrastructure to building BI mobile dashboards to a deep dive into APEX security for mobile to the latest features in Oracle MAF.

With o…

MAF 2.1.1 : Using Local Notifications

One of the new features in version 2.1.1. of Oracle MAF are local notifications.
These notifications originate within the MAF application and are received by the same application. They are delivered to the end user through standard mechanisms supported by the mobile device platform (for example, banner, sound) and can work when the application is either in the foreground, background or not running at all.

I this post I show you an example of how to work with Local Notifications from Java. I use a simple MAF app. I will not explain how to build this app, but the source can be downloaded here. It is mainly derived from the "LocalNotificationDemo" public sample app.

Introducing Local Notifications
As with many framework features, MAF supports three ways to set Local Notifications. First you can use the device features datacontrol. To support declarative use of Local Notifications, the DeviceFeatures data control includes the addLocalNotification and cancelLocalNotification metho…